Mass Air Flow Meter MAF For Saab 900S 9000 AERO CD CDE CDE 91-98 0280212019

Mass Air Flow Meter MAF for Saab

This mass air flow meter fits Saab 900S and 9000 AERO, CD, and CDE models from 1991 through 1998, cross-referencing OEM part 0280212019, and measures incoming air volume so the engine management system can meter fuel correctly.

Overview

This mass air flow meter is the sensor that reads how much air enters the engine and sends that signal to the fuel injection computer. A healthy MAF keeps the air-fuel mixture accurate, and this replacement unit serves Saab 900S and 9000 owners chasing rough running, poor economy, or a stored MAF fault code.

Built For Performance

• OEM cross-reference 0280212019 for direct identification
• Housing and connector designed to plug into the factory intake tract
• Hot-wire sensing element that reports air mass to the ECU
• Direct replacement for a failed or contaminated original meter
• Restores stable idle and accurate fuel delivery when the old sensor drifts
• Sealed housing protects the sensing element from underhood debris

Fits These Machines

• for Saab 900S 1991-1998
• for Saab 9000 AERO 1991-1998
• for Saab 9000 CD 1991-1998
• for Saab 9000 CDE 1991-1998

On-The-Job Use

• Replacing a failed MAF after a lean or rich running diagnosis
• Fixing rough idle and hesitation on older Saab 900 and 9000 models
• Restoring fuel economy after a contaminated sensor is detected
• Clearing MAF-related check engine codes during service

Specs At A Glance

Good To Know

Q: Does this MAF need programming after installation? A: No coding is typically required, though the ECU may need a few drive cycles to relearn fuel trims. A: Clear any stored fault codes after fitting the new meter.

Q: Can a dirty MAF cause the same symptoms as a failed one? A: Yes, contamination on the sensing element can mimic a failed meter, so inspect and clean the intake before replacing parts. A: If cleaning does not restore smooth running, this replacement meter is the next step.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.