Platinum .010 Piston & Gasket Set for Yamaha SX 192 1800 2013-2014

0.010 Oversized Platinum Piston & Gasket Set for Yamaha

This 0.010 oversized platinum piston and gasket set is a rebuild kit for Yamaha 1800 marine engines, supplying a replacement piston plus the gaskets and seals needed to complete a top-end refresh.

Overview

This 0.010 platinum piston and gasket set is built for Yamaha 1800 engine rebuilds, giving you a fresh piston and the gasket components needed to seal the job properly. The piston is sized 0.010 over to clean up a lightly worn or out-of-spec cylinder bore. It suits boat owners and marine mechanics handling an engine top-end rebuild on Yamaha SX 192 and 1800 powered watercraft.

Built For Performance

• Piston sized 0.010 over for lightly bored or worn cylinders
• Platinum coating for reduced friction and improved wear resistance
• Gasket set included to cover the rebuild sealing needs
• Suited to high-revving Yamaha 1800 marine engines
• Component built to match the original bore geometry

Fits These Machines

• for Yamaha SX 192
• for Yamaha 1800

On-The-Job Use

• Top-end rebuilds on Yamaha 1800 marine engines
• Cleaning up lightly worn or scored cylinder bores
• Rebuilding engines used in Yamaha SX 192 watercraft
• Marine shop and DIY engine refresh projects

Specs At A Glance

Good To Know

Q: Do I need to machine the cylinder for this piston? A: Yes, a 0.010 over piston is designed for a cylinder bored and honed to match that oversize, so machine work is required before installation. Confirm your current bore condition with a machinist first.

Q: Can I install this set on a stock, unmodified engine? A: Only if the cylinder has been bored to the matching 0.010 oversize, since this piston will not fit a standard bore. Always verify piston-to-cylinder clearance during assembly.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.