Pro-Series Drive Belt for Arctic Cat Jag AFS 440 Dlx Spec 1990-1993
Pro-Series Drive Belt for Arctic Cat Jag AFS 440 Dlx Spec 1990-1993
Couldn't load pickup availability
Pro-Series Drive Belt for Arctic Cat Jag AFS 440/Dlx/Spec.
The Pro-Series Drive Belt is a replacement belt for Arctic Cat Jag AFS 440, Dlx, and Spec. snowmobiles from 1990 through 1993, transferring engine power to the driven clutch so the sled moves under load.
Overview
This Pro-Series Drive Belt is a direct-fit replacement for the factory belt on Arctic Cat Jag AFS 440, Dlx, and Spec. models from 1990 to 1993. It restores power transfer between the drive and driven clutches so acceleration and top speed return to normal. Built for riders maintaining or restoring a vintage Jag, this drive belt keeps the sled trail-ready season after season.
Built For Performance
- Constructed with a high-strength cord reinforcement to resist stretching under load
- Engineered rubber compound for consistent grip on clutches through heat cycles
- Designed to maintain correct width and angle for proper clutch engagement
- Replacement belt sized for the Pro-Series drive system on Jag AFS 440 models
- Built to handle the demands of trail riding and repeated acceleration
Fits These Machines
- for Arctic Cat Jag AFS 440, 1990-1993
- for Arctic Cat Jag AFS Dlx, 1990-1993
- for Arctic Cat Jag AFS Spec., 1990-1993
On-The-Job Use
- Trail riding where consistent power delivery matters
- Routine belt replacement during seasonal maintenance
- Restoring a vintage Jag AFS to running condition
- Keeping a spare belt on hand for long rides
Specs At A Glance
| Part Type | Drive Belt |
| Series | Pro-Series |
| Fitment Years | 1990-1993 |
| Compatible Models | Jag AFS 440, Dlx, Spec. |
Good To Know
Q: How do I know when my drive belt needs replacing? A: Common signs include fraying edges, glazing, a burnt rubber smell, or a loss of top speed and acceleration. Check belt width against spec, since a belt worn below the wear limit will slip and should be replaced.
Q: Should I clean the clutches when installing a new belt? A: Yes, wiping clutch sheaves with a clean, non-oily cloth removes residue that can shorten belt life. Also verify belt deflection and clutch alignment after installation for best performance.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
