Regulator 4013459 Fit for Polaris 2022-2024 550 INDY EVO 121, 550 RMK 144 EVO
Regulator 4013459 Fit for Polaris 2022-2024 550 INDY EVO 121, 550 RMK 144 EVO
Couldn't load pickup availability
Regulator 4013459 for Polaris 2022-2024 550 Indy EVO 121, 550 RMK 144 EVO
This regulator 4013459 is a replacement voltage regulator for the Polaris 2022-2024 550 Indy EVO 121 and 550 RMK 144 EVO, keeping the electrical system stable and the battery charged.
Overview
This regulator 4013459 is a direct replacement voltage regulator for the Polaris 2022-2024 550 Indy EVO 121 and 550 RMK 144 EVO. It converts the engine's AC output into regulated DC power, which protects the battery and supports all electrical loads. It is built to match the original specifications for these Polaris EVO models, offering a simple swap for a failing component.
Built For Performance
- Outputs a steady 14-volt charge to maintain battery health
- Sealed casing resists moisture, snow, and vibration
- Plug-and-play connectors match the factory harness on EVO models
- Heat-tolerant internal components handle prolonged use
- Lightweight design adds no unnecessary bulk to the chassis
Fits These Machines
- for Polaris 550 Indy EVO 121 (2022-2024)
- for Polaris 550 RMK 144 EVO (2022-2024)
On-The-Job Use
- Replaces a burnt-out regulator during a breakdown on a trail
- Keeps battery voltage stable for electric start on cold mornings
- Supports accessory lights or heated grips on an EVO sled
- Used by mechanics as a direct OEM-style replacement for the 4013459 part
Specs At A Glance
| Part Number(s) | 4013459 |
| Compatible Make | Polaris |
| Engine Size | 550 |
| Model Years | 2022, 2023, 2024 |
Good To Know
Q: Can this regulator be used on a Polaris 550 Indy EVO 129? A: This regulator is listed for the 121 and 144 EVO tracks; if your 129 uses the same electrical setup and connector, it may work, but verify the original part number.
Q: How do I know this regulator is failing? A: If the battery does not hold a charge, lights flicker, or the engine misfires at high RPM, test the regulator's output voltage. A reading above 15 volts or below 13 volts suggests replacement is needed.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
