Rotary Axis for Cylinder Surface Rotation for 50/60/80/100W CO2 Engraver Cutter

Rotary Axis for CO2 Engraver Cutter

This rotary axis attachment rotates cylindrical workpieces on a 50W, 60W, 80W, or 100W CO2 engraver cutter so curved surfaces can be engraved evenly from all sides.

Overview

A rotary axis lets a CO2 engraver cutter work on round and tubular items instead of flat stock. It grips and turns the workpiece in step with the laser so patterns, text, and graphics wrap cleanly around the surface. This rotary axis suits operators engraving cups, tubes, and other cylindrical parts on compatible 50W through 100W machines.

Built For Performance

• Rotates cylindrical workpieces for full-surface engraving
• Intended for CO2 engraver cutter machines in 50W, 60W, 80W, and 100W classes
• Holds round stock in alignment with the laser path
• Supports continuous rotary engraving of curved surfaces

Fits These Machines

• for CO2 engraver cutters rated 50W
• for CO2 engraver cutters rated 60W
• for CO2 engraver cutters rated 80W
• for CO2 engraver cutters rated 100W

On-The-Job Use

• Engraving text and graphics on cups and tumblers
• Personalizing tubular and cylindrical workpieces
• Adding wrapped designs to round stock
• Decorative marking of curved surfaces

Specs At A Glance

Good To Know

Q: Do I need a rotary axis to engrave round objects? A: Yes, a rotary axis is normally required to turn cylindrical workpieces evenly under the laser. It keeps the curved surface aligned as the pattern is engraved.

Q: Will this rotary axis fit any CO2 laser machine? A: It is intended for CO2 engraver cutters in the 50W to 100W range, but mounting and wiring can differ between models. Confirm compatibility with your machine before ordering.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.