Starter Solenoid for Yamaha 2.6L HPDI 150 6 Cyl 2004-2014

Starter Solenoid for Yamaha 6 Cyl 3.544 Bore 2.6L HPDI 150

This starter solenoid is an aftermarket replacement for Yamaha 6 cylinder 3.544 bore 2.6L HPDI 150 outboards, closing the high-current circuit that spins the starter motor on key turn.

Overview

This starter solenoid for Yamaha replaces the worn relay that clicks without cranking on 2.6L HPDI 150 six cylinder outboards. It handles the high amperage draw between battery and starter so the engine turns over reliably. A direct-fit starter solenoid for Yamaha owners who want dependable starting without the original part price.

Built For Performance

• High-current contacts rated for repeated engine cranking cycles
• Sealed housing resists moisture and salt spray in the bilge
• Copper winding draws steady current for positive engagement
• Terminal layout matches the factory mounting position
• Insulated body shields against vibration-related shorts

Fits These Machines

• for Yamaha 6 Cyl 3.544 Bore 2.6L HPDI 150
• for Yamaha HPDI 150 outboards, 2004-2014

On-The-Job Use

• Replacing a solenoid that clicks but will not crank
• Restoring reliable cold starts on HPDI outboards
• Scheduled maintenance on older 150 HP six cylinder rigs

Specs At A Glance

Good To Know

Q: How do I know the solenoid is the problem and not the starter? A: A single loud click with no crank usually points to the solenoid, while no click at all often means wiring or battery issues. Test voltage at the starter terminal before ordering.

Q: Do I need to change anything else when replacing it? A: Inspect the battery cables, ground straps, and starter connections while you have access. Corroded terminals can mimic a failed solenoid.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.