Water Pump Rebuild Kit for KTM EXC-G Racing 450 2004-2006

Water Pump Rebuild Kit for KTM EXC-G Racing 450

This water pump rebuild kit is a complete seal, bearing, and gasket set for the KTM EXC-G Racing 450, providing the wear parts needed to reseal the pump and maintain steady coolant circulation.

Overview

This water pump rebuild kit for KTM EXC-G Racing 450 supplies the internal wear items so the pump can be returned to service without buying a whole new housing. It is aimed at racers and trail riders keeping a 2004-2006 EXC-G Racing 450 in reliable condition, and each water pump rebuild kit is put together for that specific model range.

Built For Performance

• Complete kit covering seals, bearing, and gaskets for a full water pump rebuild
• Seals built to handle coolant contact and heat cycles
• Bearing suited to continuous pump shaft rotation
• Gaskets shaped to seal the pump housing properly
• Parts matched to the 2004-2006 EXC-G Racing 450
• Practical rebuild for a home or shop workbench

Fits These Machines

• for KTM EXC-G Racing 450 2004
• for KTM EXC-G Racing 450 2005
• for KTM EXC-G Racing 450 2006

On-The-Job Use

• Fixing a leaking water pump seal on a race bike
• Rebuilding the pump during off-season engine maintenance
• Restoring coolant flow after overheating
• Refreshing the cooling system on a used EXC-G Racing 450

Specs At A Glance

Good To Know

Q: Should I replace the coolant at the same time as the rebuild? A: Yes, fresh coolant is recommended once the pump is resealed, since the old fluid may be contaminated. It also gives you a clean baseline for tracking temperatures.

Q: Can this kit be fitted without special tools? A: Basic hand tools are usually enough for a water pump rebuild on this model. A service manual helps with torque values and seal orientation.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.