Water Pump Rebuild Kit for Polaris Switchback 800 XCR 2018

Water Pump Rebuild Kit for Polaris

This water pump rebuild kit for Polaris is a complete seal, bearing, and gasket set designed to restore coolant circulation in your snowmobile engine.

Overview

This water pump rebuild kit for Polaris gives you the wearable components needed to refresh a tired coolant pump on your Switchback 800 XCR. It is built for riders and mechanics handling their own seasonal maintenance who want an affordable alternative to a full pump assembly. Every part in this water pump rebuild kit for Polaris is selected to keep coolant flowing and engine temperatures stable.

Built For Performance

• Includes the seals, bearings, and gaskets needed to rebuild one water pump
• Seal materials chosen for resistance to hot coolant and repeated thermal cycling
• Bearings rated for the sustained high rpm of a snowmobile engine
• Gaskets cut to match the OEM mating surfaces
• Packaged as a single kit so no individual components are missed during assembly

Fits These Machines

• for Polaris Switchback 800 XCR, 2018

On-The-Job Use

• Rebuilding a pump that has started weeping coolant past the seal
• Scheduled top end service where the pump is already accessible
• Pre-season maintenance before the first cold ride
• Trailside or shop repairs where replacing the whole assembly is not practical

Specs At A Glance

Good To Know

Q: Can I install this kit without removing the engine? A: On most Switchback chassis the pump can be serviced with the engine in place, though access varies by model year. Check your service manual for the exact procedure before starting.

Q: Do I need any extra parts to finish the job? A: You will need fresh coolant and a clean sealing surface, and some riders also replace the pump drive belt while the area is open. Confirm against your manual.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.