Water Temp Sensor for Can-Am Renegade 800R 2007-2014 Temperature
Water Temp Sensor for Can-Am Renegade 800R 2007-2014 Temperature
Couldn't load pickup availability
Water Temperature Sensor for Can-Am
This water temperature sensor for Can-Am monitors coolant temperature and relays that reading to your machine's gauge or ECU so overheating is caught before damage sets in.
Overview
This water temperature sensor for Can-Am is a direct replacement for the factory coolant temperature sender used on the Renegade 800R. It reads coolant temperature and sends the signal your gauge or ECU needs to keep the engine in a safe operating range. Designed for riders performing routine maintenance or chasing down a faulty temperature reading.
Built For Performance
- Threaded body matches the factory coolant port for straightforward installation
- Sealed connector resists moisture, mud, and wash-down spray
- Thermistor element delivers a stable signal across the full temperature range
- Housing built to handle constant vibration from trail and off-road riding
- Plug-and-play wiring connection for the stock harness
Fits These Machines
- for Can-Am Renegade 800R (2007-2014)
On-The-Job Use
- Trail riding where coolant temperature spikes on long climbs
- Mud and water crossings that stress the cooling system
- Routine cooling system maintenance and sensor replacement
- Diagnosing overheat warnings on the dash gauge
Specs At A Glance
| Part Type | Water Temperature Sensor |
| Fits | for Can-Am Renegade 800R |
| Year Range | 2007-2014 |
| Function | Coolant temperature signal to gauge or ECU |
Good To Know
Q: How do I know if my temperature sensor has failed? A: Common signs include a gauge that never moves, reads wildly inaccurate, or triggers overheat warnings on a cool engine. A scan tool or resistance test at the sensor connector confirms the fault before you replace it.
Q: Does this sensor require any special tools to install? A: Basic hand tools and a proper sealing washer are typically all you need, along with draining enough coolant to reach the sensor port. Always refill and bleed the cooling system after installation.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
