Water Temp Sensor for Kawasaki Vulcan 2000 VN2000 2004-2009
Water Temp Sensor for Kawasaki Vulcan 2000 VN2000 2004-2009
Couldn't load pickup availability
Water Temperature Sensor for Kawasaki Vulcan 2000
This water temperature sensor for Kawasaki Vulcan 2000 models monitors coolant temperature and relays that reading to the gauge and ECU so the engine runs at the right operating range.
Overview
This water temp sensor for Kawasaki Vulcan 2000 is a direct replacement coolant temperature sending unit for 2004-2009 VN2000 motorcycles. It reads coolant temperature and sends the signal to the instrument cluster and engine management system so overheating is caught early.
Built For Performance
- Thermistor element calibrated for accurate coolant temperature readings
- Threaded body matches the factory port on the VN2000 cooling system
- Sealed electrical connector resists moisture and vibration
- Brass or metal housing handles constant heat cycling
- Two-wire design compatible with the stock gauge and ECU circuit
Fits These Machines
- for Kawasaki Vulcan 2000, 2004-2009
- for Kawasaki VN2000
On-The-Job Use
- Restoring a faulty temperature gauge reading
- Routine cooling system service
- Replacing a cracked or failed factory sensor
- Diagnosing overheating or warning light issues
Specs At A Glance
| Part Type | Water Temperature Sensor |
| Position | Cooling System |
| Fitment | for Kawasaki Vulcan 2000, 2004-2009 |
Good To Know
Q: Will this sensor match my bike's factory connector? A: It is built to fit the VN2000 coolant port and electrical plug used on 2004-2009 models. Confirm your connector style before ordering.
Q: Does the sensor need calibration after install? A: No calibration is required; it threads into the stock location and plugs into the factory harness. A coolant refill and air bleed may be needed after installation.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
Share
