Wiseco 449M05800 Piston Kit for Suzuki DS125 TS125 1979-1981 58.00 mm

Piston Kit for Suzuki DS125 & TS125

This Wiseco 449M05800 .080 Piston Kit for Suzuki DS125 and TS125 models from 1979 through 1981 provides a 58.00 mm overbore piston sized .080 over stock to bring a worn two stroke top end back to spec.

Overview

This piston kit for Suzuki DS125 and TS125 machines includes the forged piston, rings, pin, and clips needed for a full top end rebuild. Riders restoring a 1979-1981 DS125 or TS125 will find the 58.00 mm bore matches .080 over stock cylinder work. The piston kit for Suzuki DS125 and TS125 keeps these classic two strokes running clean and strong.

Built For Performance

• Forged piston construction for durability under heat and rpm
• 58.00 mm diameter sized .080 over stock bore
• Ring set matched to the piston for reliable compression
• Wrist pin and circlips included for a complete top end service
• Machined skirt profile suited to two stroke port timing

Fits These Machines

• for Suzuki DS125 1979
• for Suzuki DS125 1980
• for Suzuki DS125 1981
• for Suzuki TS125 1979
• for Suzuki TS125 1980
• for Suzuki TS125 1981

On-The-Job Use

• Top end rebuild after a seize or low compression
• Bore and hone service paired with an overbore piston
• Trail riding on a classic DS125 or TS125 two stroke
• Restoration of a 1979-1981 project machine

Specs At A Glance

Good To Know

Q: Does this piston kit require boring the cylinder? A: Yes, a .080 over piston needs the cylinder bored and honed to match the new 58.00 mm size for correct clearance.

Q: Are rings, pin, and clips included? A: This kit ships as a complete piston assembly with rings, wrist pin, and circlips so the top end can be rebuilt in one job.

Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.