Wiseco 456M04950 Piston Kit for Suzuki DS80 1978-2000 49.50 mm
Wiseco 456M04950 Piston Kit for Suzuki DS80 1978-2000 49.50 mm
Couldn't load pickup availability
Piston Kit for Suzuki DS80
This Wiseco 456M04950 .020 Piston Kit for Suzuki DS80 models from 1978 through 2000 restores top end compression with a 49.50 mm piston sized .020 over stock, giving worn engines a fresh bore fit.
Overview
This piston kit for Suzuki DS80 machines delivers the forged piston, rings, pin, and clips needed to rebuild a tired top end. Riders and shops rebuilding a 1978-2000 DS80 will find the 49.50 mm bore size matches .020 over stock cylinder work. The piston kit for Suzuki DS80 keeps a classic mini bike running strong season after season.
Built For Performance
- Forged piston construction for strength under high heat and rpm
- 49.50 mm diameter sized .020 over stock bore
- Ring set matched to the piston for consistent sealing
- Wrist pin and circlips included for a complete top end refresh
- Machined skirt profile suited to two stroke port timing
Fits These Machines
- for Suzuki DS80 1978
- for Suzuki DS80 1979
- for Suzuki DS80 1980
- for Suzuki DS80 1981
- for Suzuki DS80 1982
- for Suzuki DS80 1983
- for Suzuki DS80 1984
- for Suzuki DS80 1985
- for Suzuki DS80 1986
- for Suzuki DS80 1987
- for Suzuki DS80 1988
- for Suzuki DS80 1989
- for Suzuki DS80 1990
- for Suzuki DS80 1991
- for Suzuki DS80 1992
- for Suzuki DS80 1993
- for Suzuki DS80 1994
- for Suzuki DS80 1995
- for Suzuki DS80 1996
- for Suzuki DS80 1997
- for Suzuki DS80 1998
- for Suzuki DS80 1999
- for Suzuki DS80 2000
On-The-Job Use
- Top end rebuild after a seize or loss of compression
- Bore and hone service paired with an overbore piston
- Trail and play riding on a classic DS80 mini bike
- Restoration of a 1978-2000 DS80 project machine
Specs At A Glance
| Part Number(s) | 456M04950 |
| Bore Size | 49.50 mm |
| Overbore | .020 |
| Make | for Suzuki |
| Model | for DS80 |
| Years | 1978-2000 |
Good To Know
Q: Does this piston kit require boring the cylinder? A: Yes, a .020 over piston needs the cylinder bored and honed to match the new 49.50 mm size for proper clearance.
Q: Is the wrist pin and ring set included? A: This kit ships as a complete piston assembly with rings, pin, and circlips so the top end can be assembled in one job.
Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.
Get it between -
